FRP lighting panel, also known as transparent board, is a lighting material used with steel structures. It is mainly composed of anti-aging film, resin and glass fiber. The anti-aging film plays a very good role in anti-ultraviolet and anti-static. Anti-ultraviolet is In order to protect the FRP lighting sheet from yellowing and premature loss of light transmission properties.
The uses of FRP lighting panels include: roof and wall lighting of industrial plants, heat preservation and lighting of agricultural vegetable greenhouses, roof lighting of public stadiums, and places with special requirements for flame retardant, anti-corrosion, heat insulation, etc.
Installation requirements for FRP daylighting panels
1. The roof is nailed to the crest, and the side wall is nailed to the trough;
2. The length of the roof lap depends on the slope of the roof. In principle, the length shall not exceed 400m, and the overlapping joint shall be sealed with double butyl tape if the slope is too small;
3. The lap length of the side wall is 50-150m;
4. Use butyl sealing tape at the lap joints of the lighting panels;
5. It is strictly forbidden to step on the lighting board during installation.
If you need FRP panels, please contact us!
